Elcometer 123 Profile Gauge

elcometer-ndt-cg100abdl-corrosion-ultrasonic-thickness-gauge

Product Description

Offering a full range of measurement modes including: Pulse-Echo Temp Comp Mode (PETP) and Coating Only Mode (CT) to Pulse-Echo Coating Mode (PECT), the Elcometer NDT CG100 Corrosion Ultrasonic Thickness Gauge range of handheld corrosion thickness gauges allow the inspector to choose the right tool for the job.Featuring automatic gain control (AGC) for ease of use or manual adjustment (-30dB to 70dB) to increase the amplitude of the received echo to suit the material properties, the Elcometer NDT CG100 Corrosion Ultrasonic Thickness Gauge series of NDT ultrasonic thickness gauges are ideal gauges for all applications.

The time corrected gain (TCG) feature automatically compensates for sound attenuation through a material, further increasing the performance of the gauge.Built-in Gates allow users to set the measurement parameters either on or between waveforms, bypassing any surface echos or noise from the material.Threshold adjustment allows users to adjust the sensitivity of the gauge to detect signals with lower amplitudes.

The Elcometer NDT CG100ABDL Corrosion Ultrasonic Thickness Gauge stores up to 16,000 readings with individual waveforms in alpha numeric batches and full data logging through RS232 data output to Elcometer NDT data management software.

Elcometer NDT CG100ABDL Corrosion Ultrasonic Thickness Gauge Advantages

    • Range of display & measurement options: Pulse-Echo, Echo-Echo, Pulse-Echo Temp, Comp Mode (PETP), Coating Only Mode (CT), Pulse-Echo Coating Mode (PECT)
    • Adjustable gain: -30dB to 70dB range
    • Automatic gain control (AGC)
    • Time corrected gain (TCG)
    • Gate control
    • Threshold adjustment
    • 64 User defined setups
    • Multiple language display
    • Multiple calibration and material selection options
    • High speed scan mode: 32 readings per second
    • Differential and minimal thickness alarm modes
    • Data output and storage: 16,000 readings and waveforms or B-Scans
    • Data management software


Specifications

Elcometer NDT CG100ABDL Corrosion Ultrasonic Thickness Gauge – Specifications

 

Model & Part Number CG100ABDL
Material thickness digits display
B-Scan cross sectional display
Combined B-Scan and digits display
Scan bar display
Coating thickness display
A-Scan Display + Rectified, – Rectified,
Full Waveform (RF)
Measurement Mode PE, PETP (Temp Compensation),
EE (ThruPaint™), EEV, CT (Coating) & PECT
Measurement Rate
Manual: 4 readings per second
Scan mode 50 readings per second
Scan bar display 6 readings per second
Measuring Range PE: 0.63 – 508mm
PETP: 0.63 – 508mm
EE: 1.27 – 102mm
EEV: 1.27 – 25.4mm
CT: 12.7 – 254μm
PECT: 0.63 – 508mm
PECT: 0.01 – 2.54mm
Measurement Accuracy ±0.01mm
Measurement Resolution 0.01mm
Velocity Calibration Range 1250 – 13,995m/s
Additional Features:
High speed scan mode
Differential mode
Limit alarm mode
B-Scan display speed adjustable display speed
Flaw mode Basic prove-up flaw detection using
single element angle beam transducers
Calibration setups 6 factory & 64 user-definable setups
transferrable to and from a PC archive
Gates 3 fully adjustable gates:
start, stop, width & threshold
Pulser type dual 200 volt square wave pulsers with
adjustable pulse width (spike, thin, wide)
and 50 volt cut/boost for greater penetration
Gain manual, automatic gain control (AGC)
with 110dB range (limited),
or selectable gain:
vlow, low, medium hi or vhi
Timing precision 25MHz TCXO with single shot
100MHz 8bit ultra low power 8 bit digitizer
Calibration Options single, two point, velocity & material type
Transducer Probe Type dual element & flaw prove up
Transducer Frequency Range 1 – 10MHz
Transducer recognition automatic & manual – selectable from a list
Data logging 16,000
with A/B-scan
• 210,000 – coating, material, min, max thickness
• sequential and grid logging
• Alpha numeric batch identification
• OBSTRUCT indicates inaccessible locations
V-path / dual path error correction automatic
Probe zero automatic & manual (via integrated probe disk)
Display 1/4 VGA (grayscale)
62 x 45.7mm viewable area
Display Refresh Rate 25Hz
Units (selectable) mm or inches
Backlight on / off / auto
Repeatability / Stability Indicator
Battery Type 3 x AA alkaline
Battery Life (approximate) 50 hours
Low Battery Indicator
Battery Save Mode auto
Operating Temperature -10 to 60ºC
Size (w x h x d) 63.5 x 165.0 x 31.5mm
Weight (including batteries) 383g
Aluminium case design
with gasket sealed end caps,
waterproof membrane keypad
Transducer Connector Type LEMO
RS232 Interface Bi-directional

 

Packing List

  • Elcometer NDT CG100ABDL Corrosion Ultrasonic Thickness Gauge
  • Couplant
  • Carry case
  • User manual
  • Test certificate
  • 3 x AA batteries
  • Software
  • Transfer Cable

Data Sheet

Elcometer NDT CG100ABDL Corrosion Ultrasonic Thickness Gauge – Data Sheet

Elcometer NDT CG100ABDL Corrosion Ultrasonic Thickness Gauge Data Sheet

 

Instruction Manual

Elcometer NDT CG100ABDL Corrosion Ultrasonic Thickness Gauge – Instruction Manual

Elcometer NDT CG100ABDL Corrosion Ultrasonic Thickness Gauge Instruction Manual