Elcometer 124 Dial Thickness Gauge
Product Description
The proper and effective preparation of a surface prior to coating is essential. Making sure that the correct roughness – or profile – has been generated is essential. If the profile is too low, the adhesion of the coating to the surface will be reduced. Too high and there is the danger that the profile peaks will remain uncoated – allowing rust spots to occur.
The Elcometer 124 Thickness Gauge is used to measure the peak-to-valley height of a surface profile moulded in the Elcometer 122 Testex® Replica Tape.
• Available in both Metric and Imperial versions
• Quick and easy to use
• Anvil pressure as required in the Standards
The Elcometer 124 Thickness Gauge can be used in accordance with:
• ASTM D 4417-C
• ISO 8503-5
• NACE RP 0287
• SSPC PA 17
• US Navy NSI 009-32
• US Navy PPI 63101-000
*Standards not in bold have been superseded but are still recognised in some industries.
Specifications
Elcometer 124 Dial Thickness Gauge – Specifications
| Part Number | Description | Range | Dimensions | Weight | Scale Resolution |
Certificate |
| E124—3M | Elcometer 124 Thickness Gauge | 5mm | 120 x 95 x 25mm | 254g | 2µm | ο |
ο Optional Calibration Certificate available
Packing List
- Elcometer 124 Thickness Gauge
- User Guide
Data Sheet
Standards
Elcometer 124 Dial Thickness Gauge – Standards
The Elcometer 124 Thickness Gauge can be used in accordance with:
• ASTM D 4417-C
• ISO 8503-5
• NACE RP 0287
• SSPC PA 17
• US Navy NSI 009-32
• US Navy PPI 63101-000
*Standards not in bold have been superseded but are still recognised in some industries.
Instruction Manual
Elcometer 124 Dial Thickness Gauge – Instruction Manual
Elcometer 124 Dial Thickness Gauge – Instruction Manual
Video
Elcometer 124 Dial Thickness Gauge – Video
One of the most popular methods of measuring surface profile using a replica tape, or press-o-film, such as the Elcometer 122 Replica Tape, together with a micrometer thickness gauge, such as the Elcometer 124 Thickness Gauge.
The Elcometer 122 Replica Tape consists of a foam pad attached to a non-compressible 50μm mylar backing strip and provides a very easy method of measuring surface profile. The Elcometer 122 Replica Tape is particularly useful when measuring surface profile of curved or hard to reach areas.
Simply place the tape with the foam pad onto the surface and rub the backing with a burnishing tool (swizzle stick) until it turns uniformly grey.
Once a replica of the profile is taken, use the Elcometer 124 Thickness Gauge to measure the peak-to-valley height of the surface profile. Using the Elcometer 124 Thickness Gauge is incredibly easy.
Using the value displayed by the Elcometer 124 Thickness Gauge, subtract the original thickness of the non-compressible mylar backing (50μm) to get the surface profile measurement. To get the most accurate reading, zero the Elcometer 124 Thickness Gauge to offset the original tape window thickness.
The Elcometer 124 Thickness Gauge is available as either a metric or imperial model; and used in conjunction with the Elcometer 122 Replica Tape, provides an ideal method for measuring surface profile in compliance with International Standards. And if a permanent record of the surface profile is required, you can store the replica tape in your manual report as a proof of test.
