Elcometer 106/6 Coatings on Concrete Adhesion Tester
Product Description
The Elcometer 106/6 Adhesion Tester has been specifically designed to measure Coatings on Concrete.
Operating in a similar way to the regular Elcometer 106 Adhesion Testers, the Elcometer 106/6 allows for a 50mm diameter dolly for testing coatings on concrete.
The Elcometer 106/6 is fully portable and supplied in a carry case – making it ideal for on-site tests.
The Elcometer 106/6 Adhesion Tester can be used in accordance with:
• ASTM D 7234
• BS 1881-207
• DIN 1048-2
• EN 1542
• EN 12636
Specifications
Elcometer 106 6 Coatings on Concrete Adhesion Tester – Specifications
| Part Number | Description | Certificate |
| F106—-6 | Elcometer 106 Coatings on Concrete Adhesion Tester – Scale 6 | ο |
| Range | 0 – 3.5MPa (N/mm2) 0 – 500psi | |
| Dimensions | 105 x 210mm | |
| Gross weight of kit | 5.7kg |
ο Optional Calibration Certificate available
Packing List
- Elcometer 106/6 Coatings on Concrete Adhesion Tester
- 5 x 50mm Dollies
- Support Ring
- Araldite Adhesive
- Ratchet Spanner
- Carry Case
Data Sheet
Elcometer 106-6 Coatings on Concrete Adhesion Tester – Data Sheet
Elcometer 106 6 Coatings on Concrete Adhesion Tester Data Sheet
Standards
Elcometer 106 6 Coatings on Concrete Adhesion Tester – Standards
The Elcometer 106/6 Adhesion Tester can be used in accordance with:
• ASTM D 7234
• BS 1881-207
• DIN 1048-2
• EN 1542
• EN 12636
Accessories
Elcometer 106 6 Coatings on Concrete Adhesion Tester – Accessories
| Part Number | Description |
| T10618570 | Spare Dollies 50mm Diameter (Pack of 5) |
| T99912906 | Araldite Standard Two Part Epoxy Adhesive, 2 x 15ml Tubes |
| KT001910P122 | 50mm Diameter Dolly Cutting Tool |
Instruction Manual
Elcometer 106 6 Coatings on Concrete Adhesion Tester – Instruction Manual
Elcometer 106 6 Coatings on Concrete Adhesion Tester – Instruction Manual
Video
Elcometer 106 6 Coatings on Concrete Adhesion Tester – Video
An adhesion tester is used to test how well a coating adheres to a surface, and it is most common to use a pull-off adhesion tester.
Elcometer offer three different types of pull-off adhesion tester. The original Elcometer 106 adhesion tester, which is a hand operated mechanical gauge. The hydraulic Elcometer 506 adhesion gauge, with a separate, low height actuator and range of skirts for thick and thin substrates. And finally the Elcometer 510 automatic adhesion tester, which is similar in operation to the Elcometer 506 but, rather than manually, automatically applies the increasing force at a predefined and uniform rate, storing all of the results into memory by the simple press of a button.
All pull-off adhesion testers follow the same principle. A properly prepared dolly, or pull stub, is glued to the prepared coating, and, once the glue has fully cured, the dolly is pulled off -perpendicularly (or 90 degrees) from the surface. The resultant tensile pull-off force, together with the dolly diameter, and the conditions of the dolly, are all recorded.
