TT2110 Low Cost Ultrasonic Wall Thickness Material Thickness Gauge
Product Description
Buy it online here
The TT2110 Low Cost Ultrasonic Wall Material Thickness Gauge is a hand held microprocessor controlled thickness gauge specifically designed for measuring the thickness of metallic and non-metallic materials e.g. aluminium, titanium, plastics, ceramics, glass and other good ultrasonic wave-conducting as long as the material has parallel top and bottom surfaces. With uses in many areas of industry, the TT2110 can perform precise measurements on various types of raw materials, components parts, and assembled machinery. It can also be used to monitor all types of pipes and pressure vessels for loss of thickness due to corrosion. The TT2110 is very easy to use, after a simple calibration to a known thickness or sound velocity, the gauge will give fast and accurate readings in millimetres. Sound velocities for 5 different materials can be pre-set and 10 thickness readings can be stored in the memory.Specifications
TT2110 Low Cost Ultrasonic Wall Material Thickness Gauge – Specifications
| Material : | Metallic & Non-Metallic |
| Range (probe dependant) : | 1.2 to 225.0 mm |
| Accuracy : | +/-1% of Material Thickness + 0.1 mm |
| Resolution : | 0.1 up to 99.9 mm |
| Sound velocity range : | 1000 to 9999 m/sec |
| Probe Tip diameter : | 12 mm |
| Pipe Diameter Limits : | 20 mm x 3 mm |
| Working Temp. : | -5 to 40 deg C |
| Relative Humidity : | < 90% |
| Surface Temperature : | < 60 deg C |
| Non-linear Automatic Compensation | |
| Indication of Coupling Status and low Voltage | |
| Measuring units : | mm |
| Frequency : | 5 MHz |
| Display : | 4 digit LCD |
| Memory : | 10 readings |
| RS232 : | no |
| Sound Velocity : | 5 Preset Sound Velocities |
| Auto power off : | yes |
| Power Supply : | 2 x 1.5 AA Alkaline |
| Alarm limit setting : | no |
| Battery Life : | 250 hours per battery set |
| Dimensions : | 126 x 68 x 23 mm |
| Weight : | 170g |
Data Sheet
TT2110 Low Cost Ultrasonic Wall Thickness / Material Thickness Gauge – Data Sheet
TT2110 Low Cost Ultrasonic Wall Thickness / Material Thickness Gauge – Data Sheet
Accessories
Optional Probes
| Type of Probe | Working | Measuring | Minimum | Characteristic |
| Frequency | Thickness | Size of | ||
| Range | Measuring Pipe | |||
| 5PØ10 | 5MHz | 1.2 – 225 | Ø20 x 3 | Straight Probe |
| 5PØ10/90˚ | 5MHz | 1.2 – 225 | Ø20 x 3 | Right Angle Probe |
| 7PØ6 | 7MHz | 0.75 – 60 | Ø15 x 2 | For testing thin materials |
| SZ2.5P | 2.5MHz | 3 – 300 | For testing thick materials with Rough Surfaces | |
| ZW5P | 5MHz | 4 – 80 | High Temp up to 300 deg C |
